Top of page. Skip to main contents. Skip to main menu. Skip to footer.
Main menu.

Changing Text Size

HOME > Products > Industrial Machinery > actuator > Introduction to usage examples
Main contents start here.

Introduction to usage examples

Shipping associated equipment

  • Fin stabilizer
  • Hatch cover
  • Door opening and closing devices
    • For water tight doors
    • Emergency use door
    • Engine room ceiling window
  • Exhaust fumes route damper opening and closing device
  • Wind corridor damper opening and closing device
  • Car ferry ramp door opening and closing device
  • Car ferry ramp way lifting device
  • Opening and closing valves and cocks for the various types of piping
    • Cargo oil piping
    • Oily water and ballast piping
    • Bilge piping
  • For emergency craft feeding
  • Vessels
    • Helicopter deck collapsible hand railing device
    • Assorted valves opening and closing device
    • Ammunitions storage door opening and closing device
    • Rotational firing device for missiles etcetera

Construction machinery associated equipment

  • Forklift
  • Back hoe rotation device
  • Loader and unloader rotation device
  • Tunnel rock borer machine's cutter driver device
  • Sludge transportation pipeline valve opening and closing device for the shield machinee
  • Soil improvement machine's cement milk pourer valve opening and closing device
  • Rotational drive device for pile burying machine

Pollution prevention associated equipment

  • Waste treatment devices
    • Door, damper rotation devices
    • Incinerated ash outlet damper rotation devices
  • Water treatment devices
    • The various valve opening and closing device for inlet and drain outlets.
  • Suburban pipe network valves' opening and closing device including clean water and sewage

Other

  • Multi functional rotating bucket
  • Gates
Valve opening and closing devices Sludge transportation pipeline valve opening and closing device for the shield machine
  • The form can be chosen according to the opening and closer degree of the valve (90°)
  • The opening and closing of the valve may be done either by the machine or by the remote controller.
  • Operating oil is supplied from the separately fitted hydraulic power source.
  • The form can be chosen according to the opening and closer degree of the Crusher hopper (180°)
  • The form can be chosen according to the opening and closer degree of the valve (90°)
  • The operating oil is provided by the separate hydraulics power source.
Steering devices Opening and closing devices for various hole covers
  • The form can be chosen according to the rudder's rotational range (35° to the left and 35°to the right and 74°when including the stopper).
  • The form has the power source attached and is operated from next to the machine.
  • When operating by remote (accommodation ladder) attach the steering angle feedback transmission device to the torque actuator to enable steering.
  • It is possible to provide the hydraulic power source from the mother ship's hydraulics power source. However, in such an instance the torque actuator is used as a single piece of hardware.>
  • The form can be chosen according to the opening and closer degree of the hole covers (180°)
  • It is operated by the separate hydraulic power source that is either operated by remote control or next to the machine.
Wind tunnel damper opening and closing device Forklift fork rotation device
  • The form can be chosen according to the opening and closer degree of the damper (within 90°)
  • The damper is operated by the separate hydraulic power source that is operated by remote control.
  • To gain the required damper degree use the controller that is available for the opening and closing degree feedback transmission device.
  • The form can be chosen according to fork rotation degree (360°).
  • Form is single axle.
  • The hydraulics source is provided by the vehicle's hydraulic power source.
Pile burying machine grasping device Assorted dampers and swaying devices for waste incinerators
  • The form can be chosen according to the grasping degree (within 180°)
  • The operating oil is provided by a separate hydraulics power source.
  • Has chosen a form (90 to 180°) that caters for assorted types of damper operational degrees.
  • The fire grate swaying is able to be chosen up to 180° on the basis of movement distance.
  • The operating oil is provided by a separate hydraulics power source.

Business Segment: Power Systems
Return to top.
Page Top