Top of page. Skip to main contents. Skip to main menu. Skip to footer.

HOME > Products > Industrial Machinery > Linear MP Scale(MPS series)
Main contents start here.

Linear MP Scale(MPS series)

Feature

(1) Long stroke
      Up to 32m if connecting.
(2) Same heat expansion rate as machine
      Since the base of Scale is iron, the Scale expansion is same as the machine.
(3) Air purge is unnecessary
      No influence of dust, oil, and dew condensation.
(4) Stroke flexibility
      Desired stroke is possible due to connecting method.
(5) Absolute system
      The absolute system using the offset function is possible.

Application

MPS series Scale detects the position of linear axis with high speed and high accuracy.
Long travels can be detected by connecting scale segments.
Compatible with the original linear scale manufactured by INDUCTOSYN Co.

(Note) In connection with FANUC or MITSUBISHI CNC, the absolute system (Offset function) is possible.
(Note) Various NC interface is prepared. Refer to A/D converter page.

Mounting example of the X-axis of the large-size machine tool
Mounting example of the X-axis of the large-size machine tool
Connection example of  Linear MP Scale (MPS series)
Connection example of Linear MP Scale (MPS series)

Specification

The specifications of Linear MP scale (MPS series) are shown as followings.
Model name Output wiring Applicable Slider Effective stroke Accuracy Length of piece
MPS-25ASC Terminal
connection
MPS-100ASL
(Terminal
connection)
or
MPS-100CSL
(Connector
connection)
250 mm x N pieces - 100 mm 2.0 μm 250 - 0.15 mm
MPS-30ASC 300 mm x N pieces - 100 mm 3.0 μm 300 - 0.15 mm
MPS-75ASC 750 mm x N pieces - 100 mm 4.5 μm 750 - 0.15 mm
MPS-100ASC 1000 mm x N pieces - 100 mm 5.0 μm 1000 - 0.15 mm
* Since N scales are connected, long stroke is possible.
Applicable A/D converter
NC connected Output signal Model name Resolution Max. speed
FANUC Digital A phase, B phase, and
Z phase output
ADB-20J10 0.10 μm 80 m/min
ADB-20J14 0.10 μm 80 m/min
Serial interface ADB-20J60 0.10 μm 3600 m/min
ADB-20J64 0.10 μm 1800 m/min
MITSUBISHI CNC Digital A phase, B phase, and
Z phase output
ADB-20J10 0.10 μm 80 m/min
ADB-20J14 0.10 μm 80 m/min
Serial interface ADB-20J60 0.05 μm 3600 m/min
ADB-20J64 0.05 μm 1800 m/min
MITSUBISHI
Programmable
controller
Digital A phase, B phase, and
Z phase output
ADB-20J12 0.10 μm 80 m/min

MPS-25ASC
MPS-25ASC

MPS-30ASC
MPS-30ASC

MPS-75ASC
MPS-75ASC

MPS-100ASC
MPS-100ASC
MPS-100ASL
MPS-100ASL

MPS-100CSL-T
MPS-100CSL-T

  • The combination of the different segments of MPS Scale is possible.
  • "N" described in above table shows the number of Scale.
  • The accuracy shows the width between the positive maximum error and negative maximum of measuring data.

Line UP


Business contact: Machine Tool MP Scale Technical Sales Team Office +81-75-861-3313

Return to top.
Page Top