Main Propulsion Steam Turbines
Main Features
 |
The MR-II & MS-2 series marine steam turbines are designed specifically for various kinds of application required, and both series have covered comprehensive range to 45 MW output power.
The high & intermediate-pressure or highpressure turbine, low-pressure turbine, reduction gear, main thrust block and main condenser are each standardized in design as five basic elements according to standard unit output capacities, so that the series can comply with any specific vessel propulsion power requirements by selecting proper combinations.
All the series will surely gratify you with an environment-friendly, higher reliability and safety, the best performance.
CST Series (Conventional Steam Turbine)
All the MS-2 series marine steam turbines are of non-reheat, two-cylinder cross-compound impulsereaction type, and countless delivery records are eloquent testimony to a firm reliability and safety of the CST series.
All the MS-2 series marine steam turbines invariably proved a wise investment for end-users have thus earned very high reputation among them.
UST Series (Ultra Steam Turbine)
|
| Ultra Steam Turbine (MR-II serie) |
All the MR-II series marine steam turbines are of reheat, two-cylinder cross-compound impulsereaction type, and are in the forefront of steam turbine technology.
The latest technologies and well-proven designs supported and developed by our experienced land & marine use turbines have been unstintingly introduced into the series.
The best performance of all the MR-II series marine steam turbines brings about the best propulsion for end-users and the environment-friendly UST series contributes to a saving energy as well.
Standard Frames for UST Series
HR-22: High-Intermediate Pressure Turbine with 20-22 Inches Base-diameter
LR-18: Low Pressure Turbine with 18 Inches Last Blade
T-13: Main Thrust Bearing with 13 x 103 cm2 Nominal Surface Areas
Contact
New Project
Business Development Department Marine Business Operation Group
3-1, Minatomirai 3-chome, Nishi-ku, Yokohama, Kanagawa, 220-8401, Japan
Power Systems Marine Machinery & Engine Division
After Sales Service (Parts)
MHI Marine Engineering Ltd.
Tamachi Center Building34-7 Shiba 5-Chome Minato-ku, Tokyo 108-0014, Japan
Tel.: +81-3-3798-5941
Fax.: +81-3-3798-5943
E-mail: 
Web: http://www.mhi.co.jp/mhi-me/en/
Business Segment: Power Systems
